DIY Toilet Cleaner

Print

Method

1. Weigh out the water and citric acid and stir until dissolved. 
2. Weigh out the essential oils and coco glucoside mix these together and add to the water/citric acid, stir well but gently, try not to make too many bubbles. 
3. Weigh out the glycerine in a small beaker add the xanthan gum, mix well. 
4. Now while whisking add the xanthan gum slurry to the water in a very slow stream, don’t stop whisking.  Add the Microcare DB and stir well.  Cover and wait until bubbles settle. 
5. Bottle up and ready to go! 

Note: Xanthan Gum requires a little bit of technique to work with – don't skip the glycerine step, and make sure you have a continuous slow stream going whilst whisking at the same time.  If you havn’t worked with  xanthan before, have a go making up a fifth of the recipe (100g) until you get the technique right. If it’s a big lumpy you can still use it. 

You could also not use xanthan gum and then put it in a spray bottle instead.

Suggested Alternatives: You can customise by choosing your favourite essential oil. 

Copyright, PureNature. This information is intended for personal use of PureNature customers and may not be reproduced, shared or used for commercial purposes without written consent.